Author Topic: Safety visor  (Read 4601 times)

Offline Graham

  • platinum
  • *****
  • Posts: 1250
  • Chairman. www.DidcotTurners.club
Safety visor
« on: March 08, 2015, 07:58:21 PM »
I have just brought one of the cheap Axi face shield / sagely visor things
http://www.axminster.co.uk/safety-visor
and unlike reports I have read I find it quite uncomfortable, gave me a headache after just a couple of minutes..
Does anyone know if heating the plastic band ( just a little ) and forming it into a more natural shape works ?
Regards
Graham
I have learnt the first rule of woodturning.
The internal diameter should never exceed the external width.
Nor the internal depth, the external height.
Does that make me an expert now ?

Offline MCB

  • gold
  • ****
  • Posts: 270
Re: Safety visor
« Reply #1 on: March 08, 2015, 08:04:40 PM »
I have just brought one of the cheap Axi face shield / sagely visor things
http://www.axminster.co.uk/safety-visor
and unlike reports I have read I find it quite uncomfortable, gave me a headache after just a couple of minutes..
Does anyone know if heating the plastic band ( just a little ) and forming it into a more natural shape works ?

Forgive a silly question, but did you adjust the headband to fit snugly but NOT too tight?

I  bought something similar from Screwfix (or Toolstation) a while ago and find it ok to wear.

MC

Offline Graham

  • platinum
  • *****
  • Posts: 1250
  • Chairman. www.DidcotTurners.club
Re: Safety visor
« Reply #2 on: March 08, 2015, 08:23:13 PM »
I did adjust it to fit but it makes a perfect circle and heads are more oval. I am sitting here pinching in the sides to oval it and it is changing a bit.
Regards
Graham
I have learnt the first rule of woodturning.
The internal diameter should never exceed the external width.
Nor the internal depth, the external height.
Does that make me an expert now ?

Offline The Bowler Hatted Turner

  • platinum
  • *****
  • Posts: 2260
Re: Safety visor
« Reply #3 on: March 08, 2015, 09:10:33 PM »
Graham I would imagine that a bit of gentle heat from a hair dryer or similar might be an aid to shaping the plastic but maybe a bit of padding would be better? I have one similar to this, its getting a bit old now so could probably do with replacing it but it is comfortable and I can wear it for hours.

Offline Graham

  • platinum
  • *****
  • Posts: 1250
  • Chairman. www.DidcotTurners.club
Re: Safety visor
« Reply #4 on: March 08, 2015, 09:42:06 PM »
I have been sat watching youtube videos while wearing it. Head heat seems to be improving the shape and comfort.

Thank God SWIMBO hasn't seen me  :)
Regards
Graham
I have learnt the first rule of woodturning.
The internal diameter should never exceed the external width.
Nor the internal depth, the external height.
Does that make me an expert now ?

Offline bodrighywood

  • platinum
  • *****
  • Posts: 3631
    • Bodrighy Wood
Re: Safety visor
« Reply #5 on: March 08, 2015, 09:54:27 PM »
Wise man, some of those videos are potentially lethal.

Pete
Turners don't make mistakes, they have design opportunities

Offline Les Symonds

  • platinum
  • *****
  • Posts: 3273
    • Pren
Re: Safety visor
« Reply #6 on: March 08, 2015, 09:57:31 PM »
Thank God SWIMBO hasn't seen me  :)
What does the 'I' in SWIMBO stand for?....could it be 'immediately'?

Les
Education is important, but wood turning is importanter.

Offline Graham

  • platinum
  • *****
  • Posts: 1250
  • Chairman. www.DidcotTurners.club
Re: Safety visor
« Reply #7 on: March 09, 2015, 07:58:12 AM »
I don't think it stands for anything. My understanding is that it can be spelt either literally or the way it is pronounced. :)
Regards
Graham
I have learnt the first rule of woodturning.
The internal diameter should never exceed the external width.
Nor the internal depth, the external height.
Does that make me an expert now ?

Offline Bryan Milham

  • Administrator
  • platinum
  • *****
  • Posts: 4500
  • I’ve had my patience tested; I’m negative
Re: Safety visor
« Reply #8 on: March 09, 2015, 02:54:53 PM »
From the old TV programme Rumpole of the Bailey, his wife was known as She Who Must be Obeyed (SWMBO)
Oh Lord, Lead me not into temptation…

...Oh who am I kidding, follow me, I know a shortcut!

Offline julcle

  • platinum
  • *****
  • Posts: 500
Re: Safety visor
« Reply #9 on: March 09, 2015, 04:23:09 PM »
I think this has been lifted from the book "She" by H Rider Haggard, but hyphenated. From Chapter VI:

“Slay not,” was the reply. “Four suns since was the word brought to me from ‘She-who-must-be-obeyed,’ ‘White men come; if white men come, slay them not.’ Let them be brought to the house of ‘She-who-must-be- obeyed.’
Location: S. Wales
Crowvalley Woodturners
Julian

Offline Graham

  • platinum
  • *****
  • Posts: 1250
  • Chairman. www.DidcotTurners.club
Re: Safety visor
« Reply #10 on: March 09, 2015, 04:47:39 PM »
Yes, to both of you, but it was the 'I' that was being questioned. I maintain that as it is frequently pronounced 'swim' it is also common practice to spell it that way.
Regards
Graham
I have learnt the first rule of woodturning.
The internal diameter should never exceed the external width.
Nor the internal depth, the external height.
Does that make me an expert now ?

Offline Les Symonds

  • platinum
  • *****
  • Posts: 3273
    • Pren
Re: Safety visor
« Reply #11 on: March 09, 2015, 05:04:51 PM »
Yes, to both of you, but it was the 'I' that was being questioned. I maintain that as it is frequently pronounced 'swim' it is also common practice to spell it that way.
Nothing wrong with phonetics!
Les
Education is important, but wood turning is importanter.

Offline The Bowler Hatted Turner

  • platinum
  • *****
  • Posts: 2260
Re: Safety visor
« Reply #12 on: March 09, 2015, 05:07:21 PM »
I do not have a SWMBO, I wear the trousers in my house............my wife told me so!! ;D ;D ;D ;D

Offline Eric Harvey

  • platinum
  • *****
  • Posts: 967
  • Craters project no.1
Re: Safety visor
« Reply #13 on: March 10, 2015, 09:43:09 AM »
 I`ve found the easiest way to make these fit your head better is to put on weight until your head is round enough to fit the shape of of the faceshield  ;D ;D ;D
welcome to my woodturning world

Offline Les Symonds

  • platinum
  • *****
  • Posts: 3273
    • Pren
Re: Safety visor
« Reply #14 on: March 10, 2015, 10:16:56 AM »
I do not have a SWMBO, I wear the trousers in my house............my wife told me so!! ;D ;D ;D ;D
...ah, but when my wife is out, I'm allowed to be the boss, and when I'm out, she's allowed to be the boss.....when we're both in, the boss is out!
Works for us!
Les
Education is important, but wood turning is importanter.