Author Topic: Club membership  (Read 2857 times)

Offline Graham

  • platinum
  • *****
  • Posts: 1250
  • Chairman. www.DidcotTurners.club
Club membership
« on: February 23, 2015, 11:28:24 AM »
HI all.
I tend to be a bit of a loner but am thinking of going along to my local club this week ( Didcot ) to see what it is all about. I have a few questions though.

What is the difference between an affiliated club and an associated one ?

Is it acceptable to just turn up or should I contact someone first ?

How does club membership work in regards to already being a private member of the AWGB ?

Do / Can people join several clubs ( Oxford is not far away )
Regards
Graham
I have learnt the first rule of woodturning.
The internal diameter should never exceed the external width.
Nor the internal depth, the external height.
Does that make me an expert now ?

Offline Paul Hannaby

  • platinum
  • *****
  • Posts: 1144
    • Creative Woodturning
Re: Club membership
« Reply #1 on: February 23, 2015, 11:37:21 AM »
Hi Graham,
An affiliated club is one that has 100% AWGB membership, an associated club doesn't have to have 100% AWGB membership. The other differences are in the level of financial support the AWGB can offer to the club.

If you join an affiliated club and you are already an AWGB member, you don't need to pay again for the AWGB membership and yes, you can join multiple clubs.

I think most clubs are happy for people just to turn up.

Offline Dave Brookes

  • bronze
  • ***
  • Posts: 147
Re: Club membership
« Reply #2 on: February 23, 2015, 02:39:45 PM »
Graham,
You will be most welcome on Wednesday, and now I know you are coming I can also make you that cup of tea (in advance of the Tracy Owen one)!
It is a 'hands on' evening so bring any woodturning queries or problems and someone will no doubt pitch in and help you.
Meeting starts at 7.30 at Harwell Village Hall with parking at the front or rear of the Hall.

Dave
"Annual income twenty pounds, annual expenditure nineteen pounds nineteen shillings and six pence, result happiness."  (Wilkins Micawber)

Offline Graham

  • platinum
  • *****
  • Posts: 1250
  • Chairman. www.DidcotTurners.club
Re: Club membership
« Reply #3 on: February 23, 2015, 06:13:03 PM »
Never been known to refuse a cuppa. I look forward to meeting you.
Regards
Graham
I have learnt the first rule of woodturning.
The internal diameter should never exceed the external width.
Nor the internal depth, the external height.
Does that make me an expert now ?

Offline Graham

  • platinum
  • *****
  • Posts: 1250
  • Chairman. www.DidcotTurners.club
Re: Club membership
« Reply #4 on: February 26, 2015, 09:12:59 AM »
As I said at the beginning of this thread, I am not really a 'social being' but I went along to the Didcot and district Woodturners last night and I have to say I quite enjoyed myself.
There were about 30 people there and 4 lathes on the go. One had half a dozen ( very well behaved ) children being taught, others had different projects on the go and all very interesting. I met a local RPT, a nice guy who I may well take some much needed lessons from, and his wife Shiela who is the editor of 'Revolutions'. A very pleasant evening.

The the chairman Dave Brooks makes a good cuppa, worth going just for that.  :)
Regards
Graham
I have learnt the first rule of woodturning.
The internal diameter should never exceed the external width.
Nor the internal depth, the external height.
Does that make me an expert now ?

Offline bodrighywood

  • platinum
  • *****
  • Posts: 3631
    • Bodrighy Wood
Re: Club membership
« Reply #5 on: February 26, 2015, 09:35:01 AM »
And don't assume that you don't have something to pass on either. One club I belonged to had a totally blind turner and believe me, the way he had to work taught us a lot. Everyone does things a bit different and as my grandmother used to say, "If you are too old to learn you are dead"

Pete
Turners don't make mistakes, they have design opportunities

Offline The Bowler Hatted Turner

  • platinum
  • *****
  • Posts: 2260
Re: Club membership
« Reply #6 on: February 26, 2015, 09:40:27 AM »
Graham I am glad you had a good time. I always think the social side is just as important as poking a chisel into the wood.