Downsizing is forcing me say a sad farewell to this very versatile lathe, which has served me very well over the recent past. I was fortunate to obtain a quantity of large diameter monkey puzzle a few years back, which were too large for my previous lathe, and hence an upgrade to this magnificent machine, which proved more than adequate for some serious turning. The lathe comes with a bed extension, which allows for nearly 1.5M between centres when in the raised position, and the best part of 1M diameter work when lowered. To give an idea of what it can do, some of the pieces I worked on were too heavy to lift and a chain hoist on a runway was an essential help.
The very sturdy and heavy cast iron construction helps ensure smooth running and helps minimise vibration when initially turning large out-of-balance pieces. There is a quick and easy high-low speed belt selection, which is complemented by electronic speed control. Compared to mechanical speed control, this is a joy to use, enabling rapid adjustment to suit the task in hand. The electronic reverse is a great asset when finishing certain types of timber. There is a removable guard which can help limit the trajectory of the odd workpiece which might otherwise go into orbit.
The lathe comes complete with a number of accessories, some of which are standard with the lathe, but additionally the bed extension and Axminster Evolution SK114 precision chuck and set of jaws.
Features:- Heavy cast iron construction
Precision ground bed
Electronic speed control
Digital speed display
Electronic forward/reverse selection
Spindle lock
Index lock with 36 positions in 10O steps
Comparator centres for copying
Large ergonomic cam-lock handles on headstock, tailstock & toolrest
Magnetic base emergency stop pushbutton on long flying lead
Specification:- Centre above bed: 260mm
Centre above bed with bed extension lowered: 490mm
Centre distance: 950mm
Centre distance with bed extension: 1410mm
Spindle lower speed range: 0-1200RPM
Spindle upper speed range: 0-3200 RPM
Spindle thread: M33x3.5mm
Spindle & tailstock taper: MT2
Spindle index locking: 36 x 10O
Tailstock hole diameter: 9mm
Tailstock ram travel: 120mm
Toolrest stem diameter: 25.4mm
Centre above floor level: 1130mm
Weight: 325kg (excluding bed extension, chuck etc)
Mains supply: 230v 1ph 50Hz @8A (normal 13A plug)
Motor: 1.5Hp
Accessories Included:- 350mm tool rest
150mm tool rest
toolrest extension stem for when using lowered bed
4 prong drive
Live centre
Faceplate & spanner
Allen key
Tooling knockout bar
Index fixing screw
Guard assembly
Accessory holder
Pair of comparator centres
Axminster SK114 precision chuck
Chuck key
Dovetail jaws type C: Internal grip 52-67mm, External 65-80mm
Weight of this means that it is collection only, I would recommend an estate car or van. It is really also a 2 person job, as the bed in particular is more than a one person job.
You are welcome to come and view , but please be aware that this lathe is being listed in several places.
Price £2200
Location TORQUAY
