Hello again guys,
Another small update tonight I finished the power box today and I don't mean to blow my own horn but Toot! I think it came out pretty good.
First I flatted out the primer and coated everything in black gloss.
Here is a picture with buttons in for a test fit but it didn't look complete in all black.
On to stage 2 I masked off the Logo area and based it in white primer and then left it under my desk lamp to bake for a little bit.
Next came adding colour well more black but thinned a bit and then the antique gold for the finish.
Without the start button.
With the start button.
The thinned black and the gold are all painted by hand and all that's needed is a clean up and to find a hard clear lacquer to clear coat everything.
Thanks again for reading and supporting me with this project guys and thanks for all the advice and help with all the questions I've asked so far.
I'm sure there will be more to come.
Ryan