Variable speed pulleys

[Lyngate]

I am looking for replacement variable speed pulleys , internal bore 16mm external diameter 105mm . Has anyone got any ideas where these can be purchased from?
My lathe is a Clarke CLW20RV, but I believe this method of speed control was used by a large number of manufacturers

[Bill21]

It’s called a Reeves drive. I believe Charnwood used to sell spares for their version of a lathe with this type of drive. Other vendors of this type include Axminster and SIP but I don’t know if they keep spares.

Once repaired it needs regular maintenance including removing wood dust and lubricating drive shafts. Instructions for this are on page 15 here:

https://cdn.axminstertools.com/media/downloads/105116_manual.pdf

Good luck with your quest. Let us know how you get on, it may help others.

[Lyngate]

Thank for info,
 I have found a set on the Charnwood site. 

[Bill21]

For anyone else needing Reeves Pulleys the Charnwood spares are here:

https://charnwood.net/product/spindle-pulley-set-for-charnwood-w812-w813-w870-lathe/

https://charnwood.net/product/motor-pulley-set-for-charnwood-w812-w813-w870-lathe/

[shumphr1]

axminster sell compatible pulleys for this for 26 GBP per pair (1 pair for the drive spindle and another pair for the motor)