Author Topic: Axminster AWVSWL 1200D lathe  (Read 1280 times)

Offline Brian Finney

  • iron
  • *
  • Posts: 2
Axminster AWVSWL 1200D lathe
« on: July 19, 2020, 06:00:59 PM »
450mm/18in over the bed   1200mm/47in between centres

A 1.5kW motor with electronically controlled infinitely variable speed. A choice of two pulleys offers a low speed up to 1500 rpm, good for bowl turning, and a higher range upto 3200 rpm good for spindle turning. It has a digital rpm readout. It is capable of reverse, which can be useful for sanding and hollow form work. The headstock also has an indexing capability.

The lathe comes complete with drive centre, revolving tail centre, faceplate, 350 & 150mm mm tool rests, headstock spanner, centre knockout bar, indexing key.

Solid cast iron construction weighing 186kg. Breaks down into 5 manageable pieces for transport - bed, 2No leg sections, headstock and tailstock. It will be a two man lift for each section, I can supply one man at pick up

Manual https://www.manualslib.com/manual/537044/Axminster-Awvswl1200d.html

Location L34  Collection Only

Looking for £1300  ONO

Brian

Offline Brian Finney

  • iron
  • *
  • Posts: 2
Re: Axminster AWVSWL 1200D lathe
« Reply #1 on: August 06, 2020, 08:21:06 AM »
Lee,

Look at your messages/emails

Brian