Author Topic: Open Segmented Jig  (Read 1234 times)

Offline MGNWoodturning

  • iron
  • *
  • Posts: 2
Open Segmented Jig
« on: February 04, 2020, 11:38:40 PM »
Evening all, I’m afraid that my jig making skills are pretty much non existent. I’ve tried twice to make an open segment bowl jig and it’s just not happening for me. I saw one that some guy in Australia had made, but alas it still hasn’t happened for me yet. Has anyone got a jig they’d either be willing to sell or lend to me so I can give this little project I have in mind a go please?

Offline jonas

  • iron
  • *
  • Posts: 27
Re: Open Segmented Jig
« Reply #1 on: February 05, 2020, 01:37:02 AM »
Watch Earl Rasmussen on you tube. You can't go wrong.

good luck      Jonas

Offline MGNWoodturning

  • iron
  • *
  • Posts: 2
Re: Open Segmented Jig
« Reply #2 on: February 05, 2020, 09:12:59 AM »
Yeah I’ve seen a lot of his stuff, but I do find him hard to follow and he mumbles a lot, I wish he’d speak a little clearer. Also with it being American, you get this wonderful cross over of imperial vs metric, I really wish it was one way or the other...

Offline Twisted Trees

  • platinum
  • *****
  • Posts: 775
  • Bristol, UK
    • Twisted Trees
Re: Open Segmented Jig
« Reply #3 on: February 05, 2020, 10:57:27 AM »
Yes he can be a bit difficult to follow, but this jig size is not important  bit of 30mm MDF about 150mm wide and 450mm long piece of aluminium angle and a piece of steel bar about 12mm.

Look at the second one he makes with epoxy, much easier. You will need a drill press

https://m.youtube.com/watch?v=Olgl1so4JgY&t=2s

Bottom line is it is a table that lines up with the chuck.
TT, AKA Pete, but that name is taken :-)

Offline Richard Findley

  • bronze
  • ***
  • Posts: 113
    • The Turner's Workshop
Re: Open Segmented Jig
« Reply #4 on: February 18, 2020, 09:07:33 AM »
Sue Harker makes a jig which I used for an article a year or so ago:

http://www.sueharker.com/catalog/18-segment-wheel

Only about £20 and takes a lot of head scratching out of it all.

Richard
See more of my work at www.turnersworkshop.co.uk
Follow on Instagram: https://instagram.com/richard_findley