Author Topic: Stubby Lathe 750  (Read 3976 times)

Offline georg

  • TONY & DI
  • platinum
  • *****
  • Posts: 1475
    • Anthony George
Stubby Lathe 750
« on: July 28, 2017, 07:49:18 PM »

   Does anyone know what the little toggle switch under the red stop button does, as the wires came out on installing
  the lathe after moving it. Any help Appreciated
  Thanks Tony

 
"If you always do what you always done, you always get what you always got" 

http://www.anthonygeorge.net/

Offline bernuk1

  • bronze
  • ***
  • Posts: 119
Re: Stubby Lathe 750
« Reply #1 on: July 28, 2017, 08:39:05 PM »

   Does anyone know what the little toggle switch under the red stop button does, as the wires came out on installing
  the lathe after moving it. Any help Appreciated
  Thanks Tony

Could it be reverse ? although often a reverse switch has a sort of guard round it-I'm guessing here
Mike

Offline bernuk1

  • bronze
  • ***
  • Posts: 119
Re: Stubby Lathe 750
« Reply #2 on: July 28, 2017, 08:48:42 PM »
http://toptooltips.com/stubby-lathe-review-including-prices-woodworking-750-and-1000-models/
Found this-no mention of reverse but it does offer free download of pdf manual-might help.

Regards,

Mike

Offline georg

  • TONY & DI
  • platinum
  • *****
  • Posts: 1475
    • Anthony George
Re: Stubby Lathe 750
« Reply #3 on: July 28, 2017, 09:06:15 PM »

  Thanks for replying Mike ... The black middle one is the reverse switch, the little toggle switch its baffling me at the moment.
  thank you  very much for the Link will look into it.
   Regards Tony
"If you always do what you always done, you always get what you always got" 

http://www.anthonygeorge.net/

Offline Paul Hannaby

  • platinum
  • *****
  • Posts: 1140
    • Creative Woodturning
Re: Stubby Lathe 750
« Reply #4 on: July 28, 2017, 11:17:22 PM »
The switch is probably for switching between the main controls and remote controls.

Offline bernuk1

  • bronze
  • ***
  • Posts: 119
Re: Stubby Lathe 750
« Reply #5 on: July 29, 2017, 08:18:23 AM »
Since yesterday  I have looked at several images of the Stubby 750 and have not found any with the same configuration of switches as yours. This sort of leads me to wonder if it was a mod.of some sort by a previous  owner-maybe to switch on a light or a dust extraction system.
Just a thought.

regards,
Mike

Offline georg

  • TONY & DI
  • platinum
  • *****
  • Posts: 1475
    • Anthony George
Re: Stubby Lathe 750
« Reply #6 on: July 29, 2017, 01:53:02 PM »

  Thanks Mike and Paul for your feedback ...... after working on it this morning found the switch is wired to the inverter
  but also one wire coming from the stop wiring , when wired all up it didn't seem to do anything when switched on but the
  lathe ran fine, so in the end we decided to disconnect the switch until I can find further information .The only thing we
  could think was it had something it do with the torque . The biggest problem though is you have to dismantle the whole
  lathe to get to the electrics.
  Thanks Both For Taking The Time.
  Regards Tony
 
"If you always do what you always done, you always get what you always got" 

http://www.anthonygeorge.net/

Offline bernuk1

  • bronze
  • ***
  • Posts: 119
Re: Stubby Lathe 750
« Reply #7 on: July 29, 2017, 02:30:28 PM »

  Thanks Mike and Paul for your feedback ...... after working on it this morning found the switch is wired to the inverter
  but also one wire coming from the stop wiring , when wired all up it didn't seem to do anything when switched on but the
  lathe ran fine, so in the end we decided to disconnect the switch until I can find further information .The only thing we
  could think was it had something it do with the torque . The biggest problem though is you have to dismantle the whole
  lathe to get to the electrics.
  Thanks Both For Taking The Time.
  Regards Tony
 

Your welcome Tony,it was fun searching-here's one thing I found which fascinated me-I did wonder if it was a speed ramp switch. http://www.statelinewoodturners.com/files/UpgradeYourLathe.pdf

have fun with it,
regards,
Mike

Offline georg

  • TONY & DI
  • platinum
  • *****
  • Posts: 1475
    • Anthony George
Re: Stubby Lathe 750
« Reply #8 on: July 29, 2017, 05:40:11 PM »

  Thank You Mike , I was showing Di the lathe after putting it back together  after disconnecting the toggle switch.
  So turned it on then stopped it , it stopped too quickly for my liking so Di said is that what the toggle switch was for (Bingo )
  and after reading the link you posted Bingo again.... will now have to take it all to bits again .  ;D ;D
  Much Appreciated
  Regards Tony
 
"If you always do what you always done, you always get what you always got" 

http://www.anthonygeorge.net/