Author Topic: The Road to Oz  (Read 5904 times)

Offline malcy

  • gold
  • ****
  • Posts: 456
The Road to Oz
« on: June 03, 2014, 03:11:37 PM »
This is my latest segmented offering. It uses yellow heart, holly and black dyed veneer. It was made as three identical cones, which were then cut in half and reassembled in a different orientation forming the twisted yellow brick road you see. This is my first venture into a sculpture and my first attempt as using stave type construction. Comments are welcome.

Offline woodndesign

  • platinum
  • *****
  • Posts: 2211
  • Cannock Staffordshire
Re: The Road to Oz
« Reply #1 on: June 03, 2014, 03:39:26 PM »

Wizard .. got to say that's one well thought out piece and aptly named piece... the 3 cones all had to be exact to work or was there a little tuning done.

Cheers  David
"It was the best of times, it was the worst of times,"  By Dickens ''''

Offline georg

  • TONY & DI
  • platinum
  • *****
  • Posts: 1475
    • Anthony George
Re: The Road to Oz
« Reply #2 on: June 03, 2014, 03:55:58 PM »

    The interpretation of the title is creating a visual impact of the twist and turns of the road...........every single segment
    gelling together to produce a stunning sculpture

                Di and Tony
"If you always do what you always done, you always get what you always got" 

http://www.anthonygeorge.net/

Offline edbanger

  • platinum
  • *****
  • Posts: 1719
    • Olivers Woodturning
Re: The Road to Oz
« Reply #3 on: June 03, 2014, 06:41:51 PM »
Very Nice and Very Cleaver looks great from where I'm sitting

Ed

Offline Graham

  • platinum
  • *****
  • Posts: 1250
  • Chairman. www.DidcotTurners.club
Re: The Road to Oz
« Reply #4 on: June 03, 2014, 07:59:59 PM »
Thats really impressive and very 'visual'
Regards
Graham
I have learnt the first rule of woodturning.
The internal diameter should never exceed the external width.
Nor the internal depth, the external height.
Does that make me an expert now ?

Offline malcy

  • gold
  • ****
  • Posts: 456
Re: The Road to Oz
« Reply #5 on: June 03, 2014, 08:04:03 PM »
Thanks for the comments guys. Yes David. The three cones had to be turned to almost exactly the same dimensions, especially the thickness, which also had to be the same across the width. A little fine tuning was done as the halves were rejoined and the veneer inserted between to maintain the effect. Some creative clamping was required here. Hope that answers your questions. Malcolm

Offline woodndesign

  • platinum
  • *****
  • Posts: 2211
  • Cannock Staffordshire
Re: The Road to Oz
« Reply #6 on: June 03, 2014, 08:08:55 PM »
Thanks for the comments guys. Yes David. The three cones had to be turned to almost exactly the same dimensions, especially the thickness, which also had to be the same across the width. A little fine tuning was done as the halves were rejoined and the veneer inserted between to maintain the effect. Some creative clamping was required here. Hope that answers your questions. Malcolm

Cheers Malcolm, there is so much more than meets the eye with your Art.

David
"It was the best of times, it was the worst of times,"  By Dickens ''''

Offline The Bowler Hatted Turner

  • platinum
  • *****
  • Posts: 2260
Re: The Road to Oz
« Reply #7 on: June 03, 2014, 08:34:56 PM »
Malcolm I do like this piece. There is a natural, almost languid flow in the piece. The next one you make should be a mobius strip  ;D

Offline Bryan Milham

  • Administrator
  • platinum
  • *****
  • Posts: 4500
  • I’ve had my patience tested; I’m negative
Re: The Road to Oz
« Reply #8 on: June 03, 2014, 09:01:53 PM »
Malcy,

you ask for comments, eh... when I stop being awestruck I'll try say something sensible, for now just accept -'Amazing'
Oh Lord, Lead me not into temptation…

...Oh who am I kidding, follow me, I know a shortcut!

GwilymF

  • Guest
Re: The Road to Oz
« Reply #9 on: June 04, 2014, 08:19:53 AM »
Great piece of work Malcy.
Gwilym

Offline bodrighywood

  • platinum
  • *****
  • Posts: 3631
    • Bodrighy Wood
Re: The Road to Oz
« Reply #10 on: June 04, 2014, 08:50:09 AM »
Not too sure which I admire most, the finished piece or the thought and care that must have gone into making it. Reminds me a bit of Escher's work which I always loved.

Pete
Turners don't make mistakes, they have design opportunities

Offline Eric Harvey

  • platinum
  • *****
  • Posts: 967
  • Craters project no.1
Re: The Road to Oz
« Reply #11 on: June 04, 2014, 12:10:28 PM »
Thats brilliant,what more can I say,cheers,

Eric.
welcome to my woodturning world

Mark Sanger

  • Guest
Re: The Road to Oz
« Reply #12 on: June 09, 2014, 08:23:41 AM »
This is fantastic, well done indeed and thank you for sharing.

Offline Les Symonds

  • platinum
  • *****
  • Posts: 3272
    • Pren
Re: The Road to Oz
« Reply #13 on: June 09, 2014, 09:21:50 AM »
Malcolm....I'm not a lover of the traditional forms of segmented work, but this sort of piece gives that discipline a whole new dimension.....it's an amazing piece and I just want to touch it trace around it.....very tactile, I'm sure.

Les


p.s. ... it might be a bit of fun making a mobius strip in this way!
Education is important, but wood turning is importanter.

Offline malcy

  • gold
  • ****
  • Posts: 456
Re: The Road to Oz
« Reply #14 on: June 09, 2014, 08:02:48 PM »
Thank you guys for the kind comments. The suggestion of making a Mobius strip is on my radar for the future. I need to think of a suitable theme/subject for it rather than doing something random. Malcolm.