Author Topic: Sycamore form on a plinth  (Read 3611 times)

Mark Sanger

  • Guest
Sycamore form on a plinth
« on: July 23, 2013, 09:11:35 AM »
Hi all

This sycamore form was turned thin from unseasoned sycamore, sat on a scorched oak plinth with a few found pebbles.

about 200mm high x 120mm dia, finished in oil.

Comments, welcome.

Have a great day.  :)

 

Offline bodrighywood

  • platinum
  • *****
  • Posts: 3631
    • Bodrighy Wood
Re: Sycamore form on a plinth
« Reply #1 on: July 23, 2013, 09:57:06 AM »
Looks like we are going down the same lines though you are way ahead of me in style and quality. I am using rougher natural bases as I love the contrast between the simple vases/pots and the bases. Oh I and use three stones LOL. If I keep working at it I may reach your level yet.  :-\

Pete
Turners don't make mistakes, they have design opportunities

Mark Sanger

  • Guest
Re: Sycamore form on a plinth
« Reply #2 on: July 23, 2013, 01:17:48 PM »
Hi Pete

Thank you very much, it is much appreciated.

I thought about 3 pebbles but I look at the whole composition of light against dark, and two pebbles and one similar coloured form for me is the three odd number pieces for the composition.

This was my thinking behind it, not sure if I have got it right but I will go with it for a while.  :)

Thanks for taking the time to comment.

Offline bodrighywood

  • platinum
  • *****
  • Posts: 3631
    • Bodrighy Wood
Re: Sycamore form on a plinth
« Reply #3 on: July 23, 2013, 01:21:03 PM »
Now you explain your thinking I can see it LOL. Told you you were way ahead of me. All your fault anyway for pointing me in the oriental direction.

Pete
Turners don't make mistakes, they have design opportunities

Mark Sanger

  • Guest
Re: Sycamore form on a plinth
« Reply #4 on: July 23, 2013, 01:43:59 PM »
 :) Doesn't mean I am right, just think differently, at the end of the day the great thing about convention is to mess it up and see what comes out the otherside. If we stick to how others do it, then we would never discover new ways of doing anything.  :)


Offline Bryan Milham

  • Administrator
  • platinum
  • *****
  • Posts: 4500
  • I’ve had my patience tested; I’m negative
Re: Sycamore form on a plinth
« Reply #5 on: July 23, 2013, 09:05:41 PM »
Mark,

it must be something that's going around. I also turned this shape in Walnut over the weekend (no scorched base but I did add a lid).

Maybe I'll try a base with it next.

Doubt I'll get it to look as relaxed in it's own company as your work though, it always sit's so well as a composition.
Oh Lord, Lead me not into temptation…

...Oh who am I kidding, follow me, I know a shortcut!

Offline malcy

  • gold
  • ****
  • Posts: 456
Re: Sycamore form on a plinth
« Reply #6 on: July 23, 2013, 09:31:16 PM »
Mark. That is so nice. It is so well balanced, and the contrast in colours and textures makes it sing out loud, yet it conveys such a relaxed feeling. Wish I could get any where near thinking to do that with what seems such a simple turned form. Excellent. Malcolm.

Mark Sanger

  • Guest
Re: Sycamore form on a plinth
« Reply #7 on: July 24, 2013, 11:37:01 AM »
Hi Bryan

Thank you for your comments. I like this shape as it is nice and open and quick to turn.  By adding some components to complement or contrast our work can add a lot more interest to the piece. Give it a go, it is fun experimenting.

Francesco Dibari

  • Guest
Re: Sycamore form on a plinth
« Reply #8 on: July 24, 2013, 10:21:09 PM »
elegant and very fine .. as always ..  :)

Offline woodndesign

  • platinum
  • *****
  • Posts: 2211
  • Cannock Staffordshire
Re: Sycamore form on a plinth
« Reply #9 on: July 24, 2013, 10:48:24 PM »

Simple yet stunning.. of all the discarded drawings, there's always a Phoenix in there somewhere ..

Cheers   David

"It was the best of times, it was the worst of times,"  By Dickens ''''

Mark Sanger

  • Guest
Re: Sycamore form on a plinth
« Reply #10 on: July 25, 2013, 09:47:53 AM »
Francesco and David

thank you very much for your comments, they are much appreciated.