Author Topic: loading a new topic  (Read 6647 times)

Offline Eric Harvey

  • platinum
  • *****
  • Posts: 967
  • Craters project no.1
Re: loading a new topic
« Reply #15 on: July 16, 2013, 12:47:41 PM »
Ok,took some new pics on the other memory card,shrunk them down on Intelli-studio which came free with the camera,one was taken with the 20-50mm lens,the other taken with a 16mm wide angle lens,lets see if this works,and if the pics are any good,regards,

Eric.
welcome to my woodturning world

Offline Eric Harvey

  • platinum
  • *****
  • Posts: 967
  • Craters project no.1
Re: loading a new topic
« Reply #16 on: July 16, 2013, 12:59:04 PM »
well looks like it must have been the other memory card at fault,or cropping the originals in windows down to below 2000kb,it worked anyway,this is my first twist pen kit,sovereign from Axminster,with acrylic black and tan blank,sharp corners roughed off with 1/2" spindle roughing gauge,then rounded with a 3/8" spindle gauge and taken to size with a 1/2" skew chisel,sanding was done with abranet 240-600g then sanded wet with micromesh pads 1500-12000g,thats it,regards,

Eric.
welcome to my woodturning world

Offline Bryan Milham

  • Administrator
  • platinum
  • *****
  • Posts: 4500
  • I’ve had my patience tested; I’m negative
Re: loading a new topic
« Reply #17 on: July 16, 2013, 01:54:07 PM »
Eric, well done on the perseverance to get these images posted.
Oh Lord, Lead me not into temptation…

...Oh who am I kidding, follow me, I know a shortcut!

Offline woodndesign

  • platinum
  • *****
  • Posts: 2211
  • Cannock Staffordshire
Re: loading a new topic
« Reply #18 on: July 16, 2013, 01:59:24 PM »
Well Eric .. you've got there in the end ... and what a finish too, stunning 1st with the pen, be vary pleased with yourself, the writings' on the wall, the first of many ..

Cheers  David

"It was the best of times, it was the worst of times,"  By Dickens ''''

Offline Eric Harvey

  • platinum
  • *****
  • Posts: 967
  • Craters project no.1
Re: loading a new topic
« Reply #19 on: July 16, 2013, 04:23:34 PM »
dr4gonfly,Never give up trying is the motto,just give yourself a week or two to cool off and rethink things.

David,I was really surprised at the finish straight off of the abrasive,using it wet must be the key as reccomended in Axminster`s catalogue,regards,

Eric.
welcome to my woodturning world

Offline John D Smith

  • platinum
  • *****
  • Posts: 1336
Re: loading a new topic
« Reply #20 on: July 16, 2013, 08:28:47 PM »
Hi Eric if you down load your photographs from your camera to Picasa you can set the parameters 640x480 when you export your pics it will the do this automatic everytime.

                                Regards John
John Smith