AWGB Woodturning Forum
General Category => For Sale / Wanted => Topic started by: Wood spinner on March 18, 2022, 04:23:26 AM
-
Hi , Selling this Record CL4 lathe in very nice condition , Comes with the Record factory stand , The lathe has a 3 phase motor controlled by an inverter ( In the grey control box ) and has full electronic variable speed , The bed bars are like new , Nice shiny with no rust or corrosion , The lathe also comes with the optional outside turning attachment for turning bigger items . I will also include in the sale a new bearing / shaft and belt kit , This cost £110 , Normal tool rest face plate etc also included.
If you are attending the AWGB AGM I can bring the lathe with me ( dismantled )
£700
-
Wood Spinner,
What is the spindle size please? I see there have been several options on this model.
Thanks
-
Hi Dave
This one is 3/4 x 16 tpi , The very latest new model is M33 x 3.3
As you may know you can get a range of spindle adapter for example 3/4 x 16 to M33 x 3.5
Hope that helps
-
Thanks. The brief I have on what to look for states it has to be an M33 so going tp have to pass.
-
Reduced , Now £650 , It is in very nice condition , with the new spindle kit costing over £100 included
-
OK so how about £595 inc the new spindle kit
I will be going to Nottingham on Sunday if this helps with transporting .
-
£550 or time to advertise on other sites
-
Still here and available :)
-
Available still :)
-
Could maybe help with delivery depending on distance
Roll up Roll up for a CL4 electronic variable speed lathe :)
-
Hi, do you still have this lathe for sale, looking for variable speed on for men’s shed in Loughborough
-
Hello , yes I still have it .
-
Have sent you a PM
-
Please be aware this is the latest electronic variable speed model ( The one everyone wants ) , Comes with new a headstock rebuild kit so esentually you will have a new headstock , Also comes with the Record power stand , Bed bars like new ( No rust or pitting ) and a fixed drive centre , Revolving centre , Knock out bar , face plate , Tool rest , Etc , I can drive up to 50 miles for a meet up this should help with transport .
-
G'day, is the lathe still available please?
-
Hello , Yes it is :)
-
Hi. Can you tell me where you are; Town or postcode area. I am in Northumberland so it is very relevant :)
-
Boston Lincs
-
Pre Christmas back up the list , Gingle bells :)
-
:o 2005 views and not sold yet ???