AWGB Woodturning Forum
General Category => For Sale / Wanted => Topic started by: Paul Hannaby on September 12, 2021, 11:45:09 PM
-
Now Sold
Omega Stubby S750 Lathe.
This is a fantastic machine, hardly used, in excellent condition.
Capacity: in gap- 15” swing (dia 30”) x 16” long, over bed- 8” swing x 39" long.
Spindle: 1 1/2” WIT (6 TPI, same as graduate). Through bored, 2MT. 24 position indexable.
Tailstock: 2MT, through bored, self ejecting, cam locking.
Drive: 240V single phase 1.5kW (2hp). Variable speed, 2 belt ratios. Speed 30-1500, 60-3000. Forward / reverse.
Beds: short, long interchangeable and outrigger. Main bed mount can swivel and slide to extend length between centres or to open up the larger swing over the bed.
Tool rests: Both LH and RH banjo tool slides, 2x T rests- 6” & 12”.
Accessories: 4” Axminster super precision chuck inc jaws. 3x faces plates, spindle spanners, drive centre and revolving centre. Floor standing cabinet.
Weight: HEAVY! The lathe is 270kg + other accessories and cabinet ~300kg all together.
Specs for the lathe on the Omega website (https://www.omegastubbylathes.com/files/StubbyCapacityChartM1.jpg)
Located near Worcester
-
hi paul. wanted to see it this lathe was still available.
-
I think it's just sold - I will let you know once that's confirmed.