AWGB Woodturning Forum

General Category => Tool tips & reviews => Topic started by: Derek on February 14, 2019, 11:28:15 PM

Title: Tool Rack
Post by: Derek on February 14, 2019, 11:28:15 PM
I have a pile of turning tools that keep getting moved around the workshop, so I set to and made a third rack to add to the two that I already have which I keep all the most used tools in. Now that it is complete I discovered that I could now do with more wall space as I still have more in another rack which would have been nice to get on the wall with these.

Any way the rack is now in place and filled to the max already. Where do all these tools keep coming from?

And i bet many have a lot more than this

Title: Re: Tool Rack
Post by: bodrighywood on February 15, 2019, 07:57:33 AM
Trust me that will definitely be outgrown. I am a strong advocate of keeping tools to a minimum but still find the collection keeps growing. Not as bad as some I know who literally have hundreds LOL.

Pete
Title: Re: Tool Rack
Post by: Derek on February 15, 2019, 11:23:12 AM
Trust me that will definitely be outgrown. I am a strong advocate of keeping tools to a minimum but still find the collection keeps growing. Not as bad as some I know who literally have hundreds LOL.

Pete

It already has as I have more in another cupboard but at least they are not loose I just run out of wall space. I have found another to fill the last gap already
Title: Re: Tool Rack
Post by: JollyJim on February 15, 2019, 01:44:57 PM


Hi Derek,

easy answer.....send lots of them to me, simple.....

Jim
Title: Re: Tool Rack
Post by: The Bowler Hatted Turner on February 15, 2019, 10:17:32 PM
Trust me that will definitely be outgrown. I am a strong advocate of keeping tools to a minimum but still find the collection keeps growing. Not as bad as some I know who literally have hundreds LOL.

Pete
:-[ :-[ :-[
Title: Re: Tool Rack
Post by: bodrighywood on February 15, 2019, 10:23:47 PM
Trust me that will definitely be outgrown. I am a strong advocate of keeping tools to a minimum but still find the collection keeps growing. Not as bad as some I know who literally have hundreds LOL.

Pete
:-[ :-[ :-[

Didn't mention names did I LOL? Counted mine and I have 47 not including home made ones.

Pete
Title: Re: Tool Rack
Post by: BrianH on February 16, 2019, 08:49:18 PM
Don't forget to organise the bus service along that wall because the next tool you will need will always be that one at the far end
Brian
Title: Re: Tool Rack
Post by: Derek on February 17, 2019, 12:09:59 AM
Don't forget to organise the bus service along that wall because the next tool you will need will always be that one at the far end
Brian

Not too bad as the three racks are only 66" long altogether