AWGB Woodturning Forum
General Category => Gallery => Topic started by: john taylor on August 25, 2011, 01:41:43 PM
-
A while ago I asked about car body filler on THIS (http://www.awgb.co.uk/awgbforum/index.php?topic=313.0) post here are the results.
I used a product from Plastic Padding called leak-fix
It is Spalted Beech 9 1/2" x 8 1/2" finished with 3 coats of Chestnut hard wax oil
(http://i73.photobucket.com/albums/i237/jptaylor_photos/wood/925a.jpg)
All comments welcome
john
-
The black leak-fix blends right in with the spalting, nicely done.
-
Hi John
Not sure about the foot on this. It looks a bit bulky. Nice finish. One things for sure though, it should hold water!!!
Roger G
-
Very interesting out come, has worked well, one to remember for the future. Thank you.
Davd
-
Thank you.
It has worked well so I now have a couple of tubes in the cupboard for the next bit.
I think it must be the picture in real life the foot looks much better.
john