AWGB Woodturning Forum
General Category => Tool tips & reviews => Topic started by: hughie on March 21, 2016, 08:25:31 AM
-
The longworth chuck has been partially done for quite awhile, maybe 5-6 years never really had a job for it so it just sat there. Well have one for it now 400mm Blackwood bowl https://en.wikipedia.org/wiki/Acacia_melanoxylon
Chuck dimensions 600mm x 10mm polycarbonate, mounted on a face plate
-
Very nice Hughie.
-
Hughie,
A useful addition to any workshop, and fairly easily made.
I made one some years ago out of MDF, but I prefer yours for the simple reason, people can see how it works.
-
Hughie,
A useful addition to any workshop, and fairly easily made.
I made one some years ago out of MDF, but I prefer yours for the simple reason, people can see how it works.
The Polycarbonate fell into my lap a few years ago. They were replacing a couple of machine doors where I worked at the time and couldnt pass up the opportunity. There was enough to make two 600 and 300, yes handy but for me they are used infrequently.