AWGB Woodturning Forum
General Category => Gallery => Topic started by: Tony_a on October 16, 2017, 10:29:24 AM
-
Greetings All
I am relatively new to wood turning and while this is not my first bowl it is the first that I feel comfortable posting here.
Was turned from a old, dry and deeply cracked eucalypt burl. I chose to stabilise it with black pigmented resin prior to turning.
Bowl is 170 by 90, finished with poly, rubbed with 0000 then waxed
I am keen to improve my turning skills so any comments and criticisms are welcome
Tony
-
I like this bowl a lot it is a very nice effect the way tyou have filled the cracks.
Well done
Regards George.
-
I'd say that is a very decent effort for a first bowl. I am with George: very nice effect with the black fill.
One piece of advice: A completely flat foot can catch you out in the long run. Wood is never 100% at rest, it always moves a little with changes in the weather. And Eucalyptus is particularly know for moving a lot. In consequence you are probably better off with a foot that has a ring and the inside of the ring is recessed a little. If the bowl warps, you have a much better change of it still standing on three points (and therefore being stable).
-
That is a very attractive bowl, both from the point of view of the form, and of the way that you have stabilised the wood.
Well done...Les
-
Nice job Tony
I agree with the other comments looks great from where I'm sitting.
Ed
-
It looks lovely . You are on the road to success ;)
-
George, Fuzzyturns, Les, Ed and wood spinner
Thank you all for taking the time to reply and your comments are appreciated. Using resin to stabilise this piece was a learning exercise for me and I'm glad you like it.
I have been trying to focus on one aspect of turning at a time. Initially tool use, then form and I feel the foot is next. .
Tony
-
A really unusual piece of wood you have got there , the simplicity of the form and perfect curves set it off very well.
The dark resin looks natural to me , thought it was until I read the script :)
Kind Regards Tony d
-
Thank you for the comments Tony d. Black pigment was a "Safe" option. May try something a little more colourful with the next one.
Tony
-
Well done Tony , a very nice piece. Would you care to share what resin and pigment you used?
-
Thank you for the comments Bowler Hatted Turner. I used a clear epoxy casting resin,Solid Solutions casting resin 606, with a black pigment paste. If using a dark pigment the clear epoxy is not essential. Folk who are serious about casting with resin use a pressure pot to squash internal air bubbles but this was done low tech. The outside form was roughed out with a face plate helping to hold it together, wrapped the form in several layers of glad wrap, went around the sides and base with masking or electrical tape. finally cut the glad wrap off the top of the form and pored the resin into the cracks.
When I turned out the centre I found a number of internal voids that required filling and this became a bit tedious as the resin wouldn't run into the small holes and sanding would then reopen them.
Have attached a photo to show what the original burl looked like.
Tony
-
Thank you for that Tony. Obviously a great deal of attention was given to get the final finish. Well done.
-
Wow, Well done Tony, for a beginner its outstanding.
-
Thanks Hughie. High praise indeed. I wouldn't post any work on here that I wasn't happy with. If I can see faults in it I don't need others to tell me and I feel that is disrespecting other users of the forum asking them to comment. However, I do believe that constructive critical comment helps me improve my work and one of the reasons I have started posting on this forum is that members don't hold back in saying what they think, constructively of course.
Tony
-
This bowl has been chosen as turning of the month and is featured on the AWGB website here https://www.awgb.co.uk/awgb-turnings/ (https://www.awgb.co.uk/awgb-turnings/)
Well done Tony!
-
This bowl has been chosen as turning of the month and is featured on the AWGB website here https://www.awgb.co.uk/awgb-turnings/ (https://www.awgb.co.uk/awgb-turnings/)
Well done Tony!
Well deserved
Regards George
-
Well that's a surprise; not really sure what to say. I opened the thread, skimmed through the message and I thought I had clicked on the wrong one and went back and tried again, re-read the post and then it dawned me.
I'm still a beginner with much to learn and now I'll be even more nervous with my second post than I was with the first.
I've looked at most of the works in the last 30 pages of this gallery and that is a great learning tool for a beginner. I appreciate the opportunity to learn from experienced turners that this and other forums offer. Hopefully in time I can offer something back.
Tony
-
Hi Tony
I have only just seen this bowl, and what a cracker it is too.
well deserved fella
Andy
-
There you go Tony, its now official how good it is.
-
Thanks Hughie, Andy and George... and Paul too.
-
Hi Tony,
I did make a comment on the AWGB Facebook page in case you missed it Congratulations :)
Regards John
-
Thanks John. Had missed it, haven't signed up for facebook yet. Don't like to rush into things.
-
Late to the party but I also agree with all the above.
You say 'I have been trying to focus on one aspect of turning at a time. Initially tool use, then form and I feel the foot is next.' , in all honesty, I don't think there is much wrong with the foot, there is just enough to lift the shape of the form clear of the surface to give the impression of floating above the surface, something we all aspire to.
You may have taken the easy route by using the black pigment, but it certainly works very well against the colour of the Euc'.
Great form and even better finish.
-
Thanks for the comments Dragonfly
Tony