AWGB Woodturning Forum
General Category => General Discussion => Topic started by: Dave Atkinson on March 29, 2021, 08:47:25 AM
-
Morning all
Our club (ashley Woodturning Club) has just been donated a VB 36 which is fabulous. I have been looking at the manual and the bearings need VB-Lube which is sold by Steinhart in Germany, but there isn't a UK dealer. Does anyone know if there is an equivalent lubricant available in the UK?
Any suggestions welcome.
Thanks Dave
-
Hi David, I’m sure this was discussed on one of the VB forums but I can’t find the info in any files. It might be worth getting in touch with George Watkins, I’m sure he would have some info.
Regards
Michael
-
May be worth having a read of this
https://www.machinerylubrication.com/Read/243/sleeve-bearing-lubrication
-
Thank you both
There isn't a UK supplier for VB-Lube but I can get from Germany.
I will oook at the website later.
Thanks for you help guys
Cheers Dave
-
From the description it sounds like it could be something like Slick 50. I used to put this in my car engines years ago. It’s supposed to reduce friction and prolong the life of the engine. Sadly it probably doesn’t have the “fairy dust” in VB lube. ;D
-
I guess you are probably right about VB-Luve fairy dust but given it isn't expensive (less than £20) and the lathe is, I'm going to order it from Germany.
Cheers Dave
-
it isn't expensive (less than £20) and the lathe is, I'm going to order it from Germany.
Cheers Dave
Minimum order seems to be €25.00 plus €15.00 shipping? You could also end up with a bill for VAT plus the normal £8 - £10 handling fee. So that could end up at over £50? That’s if they’re shipping to the UK at the moment. Some European countries aren’t due to the new VAT rules.
-
Bare in mind how little the VB uses, it may be worth posting on a couple of forums (VB36 owners etc) to see if a few people can send you a small amount - job done.