AWGB Woodturning Forum
General Category => Gallery => Topic started by: z3ddie on June 20, 2015, 04:13:54 PM
-
Well - I decided to step over to the dark side today with a bit of Idigbo that I got off a carpenter - I have to say hats off to you 'bowlers'. I was so nervous about getting a catch and going through the wall of it I made the executive decision to polish it and go for a pint. Just sanding sealer and wax. I really now appreciate the skill in some of the work shown here with your fine walls. Anyway I needed something to keep the car keys in so this will do!
-
That looks pretty good to me. I like the groove around the top half. A bit wide maybe, but looks nice and smooth. Well done, especially for a first bowl.
-
hats off to you for using idigbo for a first bowl, it's crap stuff to turn. as a joiner i had access to plenty but soon found out that it was too soft for my then novice skills.
ask, the carpenter for a bit of sapele or iroko to use as they are easier for turners new to making bowls.
you've done well considering the timber and i'm liking the bit of laburnum underneath.
where exactly are you zeddie, you'd be welcome to some of my wood as i've far too much.
-
looking good - i have not done much turning and as you say it gives you respect for the items and skill you see on here.
-
I remember my first attempt at a bowl....and it wasn't that good!
Nice one!
Les
-
Well done z3ddie always keep your first bowl gives you something to look back on.
My first bowl was no where near as good as yours,
-
z3ddie,
for a first bowl it's a damn fine bowl. A lot of first bowls are like 'Dog bowls', straight sides flat bottoms etc..
This has a good curve that holds it's line, a decorative effect in the cove and is well finished.
But Idigbo, if you can make a good job of that, just wait until you get hold of a decent timber.
-
Have to echo pretty much everything said so far. First bowl? Look forward to the future ones. Congratulations as well on not doing what was described as a dog bowl .
Pete
-
Bryan are you having a pop at my first bowl :) :) :) :)
-
Ed,
Sorry, I'd have to look back to see your first bowl, but I know the wife kept mine! Shudder to remember it never mind see it again.
-
Ed,
Sorry, I'd have to look back to see your first bowl, but I know the wife kept mine! Shudder to remember it never mind see it again.
My sister has my first bowl and refuses to let me have it back in exchange for a decent one. Gross, bad finish, shape etc you namne it LOL.
Pete
-
I've still got mine - look at it every now and then and Bryan your right it looks like a dog bowl straight side flat bottom and tooling marks all over the place.
I think I might see if I can make another :)
Ed
-
Thanks for all the kind words and encouragement! This, like I said was a little experiment and I now wish I had gone with a 'stronger' wood, but all the same I like it - I did a lot of Youtubing before I started and must really mention Carl Jacobson who's excellent little videos gave me the confidence to have a go - for the time being it's back to the lamps - I actually have a commission! Pic's to follow!
-
ask, the carpenter for a bit of sapele or iroko to use as they are easier for turners new to making bowls.
I am not sure why you are suggesting these exotic alternatives for idigbo. There's plenty of nice wood for turning to be had from local trees. In my experience, cherry or sycamore are (usually) very nice to turn, and any local tree surgeon should have a good pile of either. Apart from not impacting on trees that may well be on some or other endangered species list, the local ones are probably cheaper, too.
This is not a criticism, just a suggestion. If you have ready access to exotic timbers as left overs from some carpentry process, by all means, go for it.
-
Hi Fuzzy - I have an ever increasing stockpile of local natural wood, Beech, Oak, Cherry, Ash, Apple and Laburnum as I am an avid woodburner and source most of the fuel for free (my heating costs are ridiculously low) - I have selected quite a few choice pieces but being new and impatient my local carpenter friend piles offcuts from jobs that would otherwise be put onto their bonfire and kindly lets me have them. This, I feel, gives me nice seasoned hardwood to practice on and actually makes some nice pieces that are appreciated by the people I give them to. I am now in the process of storing the good bits from my logpile and letting time and nature take its course, having cut and sealed them. I have learned very quickly that if you are to be a self sufficient turner you need patience in bucket loads! I am now a bit of a standing joke with my friends as every time I go to their houses I always raid their logstores! Even the local boozers isn't safe
-
ask, the carpenter for a bit of sapele or iroko to use as they are easier for turners new to making bowls.
I am not sure why you are suggesting these exotic alternatives for idigbo. There's plenty of nice wood for turning to be had from local trees. In my experience, cherry or sycamore are (usually) very nice to turn, and any local tree surgeon should have a good pile of either. Apart from not impacting on trees that may well be on some or other endangered species list, the local ones are probably cheaper, too.
This is not a criticism, just a suggestion. If you have ready access to exotic timbers as left overs from some carpentry process, by all means, go for it.
i was merely suggesting a different timber that would be available from his carpenter friend. i've been a joiner since i was 18 and know that from the joinery shop offcut bin idigbo is possibly the worst possible wood for making a bowl as i tried it myself when i started turning.
there are plenty of other timbers used in the joinery industry but sapele and iroko are the most common that would be the best for turning.
-
For a first attempt this is a very neat and tidy bowl z3ddie...... cannot really judge the finish from the photo
but looks ok from here.
Tony di
-
A good first bowl. Worth keeping and using it to compare as you go further into your woodturning journey