AWGB Woodturning Forum

General Category => Gallery => Topic started by: Andy Coates on February 04, 2011, 08:12:04 AM

Title: test for image upload capacity
Post by: Andy Coates on February 04, 2011, 08:12:04 AM

This is test to check image uploads are now working after capacity reset..

Title: Re: test for image upload capacity
Post by: Andy Coates on February 04, 2011, 08:12:54 AM

and apparently they are...

Title: Re: test for image upload capacity
Post by: Andy Coates on February 05, 2011, 08:33:05 PM

test 2 for 500 error

Title: Re: test for image upload capacity
Post by: John D Smith on February 05, 2011, 09:10:33 PM

Hi Andy, This may be nothing to do with your tests,earlier I tried to post an image in the gallery the post went but not the photograph, I deleted the post,I then remembered on the old forum we had to reduce the photo to 640X480 pixels so   I tried that  sent it again and it worked,so I have posted this as it may be useful to some one, that is if my assumption is correct.Sorry if I am off the subject of your thread.Regards John

Title: Re: test for image upload capacity
Post by: Andy Coates on February 05, 2011, 10:22:35 PM

Ahhh...you could have hit the nail on the head, John. I'll alter the image size allowance and we'll see! Many thanks.

Title: Re: test for image upload capacity
Post by: thebowlerhattedturner on February 06, 2011, 04:29:26 PM

I tried what John S suggested and it worked. See John, you do know a bit about computers! ;D
Andy, thanks for you efforts to get the forum back to normal.
Regards
John

Title: Re: test for image upload capacity
Post by: John D Smith on February 06, 2011, 06:13:44 PM

Hi Andy,John(BHT) This was more by luck than judgement,I am glad it worked.Regards John