AWGB Woodturning Forum

I need to sell my father's woodturning equipment which has not been used for about 7 or 8 years. I have attached photos of the following items: 1  Record Power RPLB 24-48 Lathe Stand; 1 Record Power CL3 36 X 30 Lathe; 1 Clarke Metalworker Bench Grinder - Model No. CBG6RC; 1 Record Power Bench Grinder - Model No. SM155; 1  Woodster 2 Bandsaw Model No. BS412 with attached vacuum.
I would prefer to sell these items as a job lot but would consider selling individual items. They would need to be collected from Broadstairs, Kent. Any offers considered, please contact me to discuss. Many thanks.

I also have woodturning tools for sale and will post separately about these.

Hi All,

coming Saturday (may 4th) I will be demonstrating at the Dublin Woodturners... So if anybody wants to drop by please do so! Contact Pat Walsh (patturnwalsh@gmail.com) if you want to be there.
I will be demonstrating the whole day and doing several things, Including making and explaning about the self closing hollow form. (I did a small tour with this self closing hollow form thrue Northern England in 2017)
And Lies and I  made a video about it:
this is the video:

https://youtu.be/gZ5a2iUE7E4

Grtz
Ronald

They are a fairly standard cheap set of tools but will get you started in fact some of them you will not get round to replacing for 20 years or so.

The angle will be whatever you like to use but as a starting point

Left to right right 45° 45° 25° 25° 80° not sure, hate these and don't use them. 25° 45°

My preference

45° 50° 15° 15° Neg rake 60/20, in the bin, 25° 45°

Hi everyone, not been on here for ages but just managed to set up my new lathe and was wondering if you could help.

Wife bought me a set of Nielsen gouges as a present but I can't seem to find a guide on sharpening angles/jigs or the like. They're not the same angles or shape as others on the market so wanted to know if you guys had any ideas?

I'll add a link so you can see what I'm on about.

Cheers, Gav.

https://www.ebay.co.uk/itm/295882023766?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=cpjgrvMORP6&sssrc=4429486&ssuid=kzyAEYd9TJu&var=&widget_ver=artemis&media=COPY

I’ve got an AC400. As I extract dust with a shop vac next to the lathe, I mounted the AC400 above me so that it blows clean air past my head. The controls are therefore easily reached. Just as well as the remote stopped working outside of the warranty.