Hi all
I have a Jet JWBS-9 band saw just about 12 months old. Today I went to change the blade from a 10mm to 6 mm.
The 10mm blade was tracking fine but the 6mm blade runs central on the top wheel but over hangs the front of the bottom wheel.
Thinking the blade was at fault I put the 10mm blade back on. However this now does the same thing.
I have eased off the thrust bearings and cool blocks. Tried tracking first then tension and tension first and then tracking still the same.
Both baldes have run fine before.
There does not appear to be any way to track the bottom wheel.
Anybody have any suggestions as to cause and retification?
Many thanks in advance.